<track id="f7ppb"><sub id="f7ppb"></sub></track>

    <pre id="f7ppb"><dfn id="f7ppb"><th id="f7ppb"></th></dfn></pre>

      <output id="f7ppb"></output>

                    DE95/J Riveting Machine

                    DE95/J Riveting Machine
                    Servo Motor of Fully Automatic Button Puncher (Denim Button)
                    It is suitable for jeans I-button binding.
                    Put the button into the corresponding two hoppers, turn the hopper automatically, fill the track automatically, send the button to the upper and lower moulds automatically, and drive by servo motor. As long as you press the barefoot switch, you can bind freely and easily. Replacing accessories can bind other buttons.
                    Servo motor drive, PLC control, assembly of advanced anti-hitting hand induction device, machine operation, such as finger under the mold, the machine will sense the finger, immediately stop and automatically restore to the stop position, will not crush the finger.
                    To configure
                    1. Electronic Safety Anti-hitting Device with CE Certification
                    2. Button auto-supply device, no manual button, safe)
                    3. Pressure Buffer Auto-regulator for Installation (No Adjustment for Cloth Thickness)
                    4. Automatic counter
                    5. Laser lamp alignment device with adjustable brightness
                    6. Selection of two nailing modes: continuous and singles
                    7. Selection of two operation modes: automatic and manual
                    8. Adjustable positioning plate (five-claw clasp, four-clasp clasp is applicable)
                    9. Casters with easy movement, fixing and adjusting levels
                    10. Left foot pedal fitted with ergonomics
                    11. Servo motor with adjustable speed and constant torque
                    12. Adjustable Binding Speed
                    13. Adjustable operation time of feeding motor
                    1. The bottom nail of the jeans'button is unchanged. The diameter of the button surface is 1520 mm, which can be punched through. It only needs to change the button mould (other sizes need to be customized).
                    2. The text and pattern of a particular Jean I-button can be directed with a deviation of (+2mm) (specially customized)
                    3. Safety Fighter-proof Function with EU CE Safety Certification
                    technical parameter
                    Driving mode: Servo motor
                    Maximum power: 0.75KW
                    Voltage: 220V
                    Frequency: 50/60Hz
                    Speed: 200 times per minute/min
                    Laryngeal depth: 105mm
                    Laryngeal height: 20mm
                    Operating Height: 880 mm
                    Weight: 110 kg
                    Dimension WxDxH: 500x500 x 1400mm